add_rule :
  {term_name : string, fixity : fixity,
   pp_elements: term_grammar.pp_element list,
   paren_style : term_grammar.ParenStyle,
   block_style : term_grammar.PhraseBlockStyle *
                 term_grammar.block_info}  -> unit
STRUCTURE
SYNOPSIS
Adds a parsing/printing rule to the global grammar.
LIBRARY
Parse
DESCRIPTION
The function add_rule is a fundamental method for adding parsing (and thus printing) rules to the global term grammar that sits behind the functions Term and --, and the pretty-printer installed for terms. It is used for everything except the addition of list-forms, for which refer to the entry for add_listform.

There are five components in the record argument to add_rule. The term_name component is the name of the term (whether a constant or a variable) that will be generated at the head of the function application. Thus, the term_name component when specifying parsing for conditional expressions is COND.

The following values (all in structure Parse) are useful for constructing fixity values:

   val LEFT       : HOLgrammars.associativity
   val RIGHT      : HOLgrammars.associativity
   val NONASSOC   : HOLgrammars.associativity

   val Binder     : fixity
   val Closefix   : fixity
   val Infixl     : int -> fixity
   val Infixr     : int -> fixity
   val Infix      : HOLgrammars.associativity * int -> fixity
   val Prefix     : int -> fixity
   val Suffix     : int -> fixity
The Binder fixity is for binders such as universal and existential quantifiers (! and ?). Binders can actually be seen as (true) prefixes (should `!x. p /\ q` be parsed as `(!x. p) /\ q` or as `!x. (p /\ q)`?), but the add_rule interface only allows binders to be added at the one level (the weakest in the grammar). Further, when binders are added using this interface, all elements of the record apart from the term_name are ignored, so the name of the binder must be the same as the string that is parsed and printed (but see also restricted quantifiers: associate_restriction).

The remaining fixities all cause add_rule to pay due heed to the pp_elements (“parsing/printing elements”) component of the record. As far as parsing is concerned, the only important elements are TOK and TM values, of the following types:

   val TM  : term_grammar.pp_element
   val TOK : string -> term_grammar.pp_element
The TM value corresponds to a “hole” where a sub-term is possible. The TOK value corresponds to a piece of concrete syntax, a string that is required when parsing, and which will appear when printing. The sequence of pp_elements specified in the record passed to add_rule specifies the “kernel” syntax of an operator in the grammar. The “kernel” of a rule is extended (or not) by additional sub-terms depending on the fixity type, thus:
   Closefix    :      [Kernel]     (* no external arguments *)
   Prefix      :      [Kernel] _   (* an argument to the right *)
   Suffix      :    _ [Kernel]     (* an argument to the left *)
   Infix       :    _ [Kernel] _   (* arguments on both sides *)
Thus simple infixes, suffixes and prefixes would have singleton pp_element lists, consisting of just the symbol desired. More complicated mix-fix syntax can be constructed by identifying whether or not sub-term arguments exist beyond the kernel of concrete syntax. For example, syntax for the evaluation relation of an operational semantics ( _ |- _ --> _ ) is an infix with a kernel delimited by |- and --> tokens. Syntax for denotation brackets [| _ |] is a closefix with one internal argument in the kernel.

The remaining sorts of possible pp_element values are concerned with pretty-printing. (The basic scheme is implemented on top of a standard Oppen-style pretty-printing package.) They are

   (* where
        type term_grammar.block_info = PP.break_style * int
   *)
   val BreakSpace : (int * int) -> term_grammar.pp_element
   val HardSpace : int -> term_grammar.pp_element

   val BeginFinalBlock : term_grammar.block_info -> term_grammar.pp_element
   val EndInitialBlock : term_grammar.block_info -> term_grammar.pp_element
   val PPBlock : term_grammar.pp_element list * term_grammar.block_info
                 -> term_grammar.pp_element

   val OnlyIfNecessary : term_grammar.ParenStyle
   val ParoundName : term_grammar.ParenStyle
   val ParoundPrec : term_grammar.ParenStyle
   val Always : term_grammar.ParenStyle

   val AroundEachPhrase : term_grammar.PhraseBlockStyle
   val AroundSamePrec   : term_grammar.PhraseBlockStyle
   val AroundSameName   : term_grammar.PhraseBlockStyle
   val NoPhrasing       : term_grammar.PhraseBlockStyle
The two spacing values provide ways of specifying white-space should be added when terms are printed. Use of HardSpace n results in n spaces being added to the term whatever the context. On the other hand, BreakSpace(m,n) results in a break of width m spaces unless this makes the current line too wide, in which case a line-break will occur, and the next line will be indented an extra n spaces.

For example, the add_infix function (q.v.) is implemented in terms of add_rule in such a way that a single token infix s, has a pp_element list of

   [HardSpace 1, TOK s, BreakSpace(1,0)]

This results in chains of infixes (such as those that occur with conjunctions) that break so as to leave the infix on the right hand side of the line. Under this constraint, printing can’t break so as to put the infix symbol on the start of a line, because that would imply that the HardSpace had in fact been broken. (Consequently, if a change to this behaviour is desired, there is no global way of effecting it, but one can do it on an infix-by-infix basis by deleting the given rule (see, for example, remove_termtok) and then “putting it back” with different pretty-printing constraints.)

The PPBlock function allows the specification of nested blocks (blocks in the Oppen pretty-printing sense) within the list of pp_elements. Because there are sub-terms in all but the Closefix fixities that occur beyond the scope of the pp_element list, the BeginFinalBlock and EndInitialBlock functions can also be used to indicate the boundary of blocks whose outer extent is the term beyond the kernel represented by the pp_element list. There is an example of this below.

The possible ParenStyle values describe when parentheses should be added to terms. The OnlyIfNecessary value will cause parentheses to be added only when required to disambiguate syntax. The ParoundName will cause parentheses to be added if necessary, or where the head symbol has the given term_name and where this term is not the argument of a function with the same head name. This style of parenthesisation is used with tuples, for example. The ParoundPrec value is similar, but causes parentheses to be added when the term is the argument to a function with a different precedence level. Finally, the Always value causes parentheses always to be added.

The PhraseBlockStyle values describe when pretty-printing blocks involving this term should be entered. The AroundEachPhrase style causes a pretty-printing block to be created around each term. This is not appropriate for operators such as conjunction however, where all of the arguments to the conjunctions in a list are more pleasingly thought of as being at the same level. This effect is gained by specifying either AroundSamePrec or AroundSameName. The former will cause the creation of a new block for the phrase if it is at a different precedence level from its parent, while the latter creates the block if the parent name is not the same. The former is appropriate for + and - which are at the same precedence level, while the latter is appropriate for /\. Finally, the NoPhrasing style causes there to be no block at all around terms controlled by this rule. The intention in using such a style is to have block structure controlled by the level above.

FAILURE
This function will fail if the pp_element list does not have TOK values at the beginning and the end of the list, or if there are two adjacent TM values in the list. It will fail if the rule specifies a fixity with a precedence, and if that precedence level in the grammar is already taken by rules with a different sort of fixity.
EXAMPLE
There are two conditional expression syntaxes defined in the theory bool. The first is the traditional HOL88/90 syntax. Because the syntax involves “dangling” terms to the left and right, it is an infix (and one of very weak precedence at that).
   val _ = add_rule{term_name = "COND",
                    fixity = Infix (HOLgrammars.RIGHT, 3),
                    pp_elements = [HardSpace 1, TOK "=>",
                                   BreakSpace(1,0), TM,
                                   BreakSpace(1,0), TOK "|",
                                   HardSpace 1],
                    paren_style = OnlyIfNecessary,
                    block_style = (AroundEachPhrase,
                                   (PP.INCONSISTENT, 0))};
The second rule added uses the more familiar if-then-else syntax. Here there is only a “dangling” term to the right of the construction, so this rule’s fixity is of type Prefix. (If the rule was made a Closefix, strings such as `if P then Q else R` would still parse, but so too would `if P then Q else`.) This example also illustrates the use of blocks within rules to improve pretty-printing.
   val _ = add_rule{term_name = "COND", fixity = Prefix 70,
                    pp_elements = [PPBlock([TOK "if", BreakSpace(1,2),
                                            TM, BreakSpace(1,0),
                                            TOK "then"], (PP.CONSISTENT, 0)),
                                   BreakSpace(1,2), TM, BreakSpace(1,0),
                                   BeginFinalBlock(PP.CONSISTENT, 2),
                                   TOK "else", BreakSpace(1,0)],
                    paren_style = OnlyIfNecessary,
                    block_style = (AroundEachPhrase,
                                   (PP.INCONSISTENT, 0))};
Note that the above form is not that actually used in the system. As written, it allows for pretty-printing some expressions as:
   if P then
      <very long term> else Q
because the block_style is INCONSISTENT.

The pretty-printer prefers later rules over earlier rules by default (though this choice can be changed with prefer_form_with_tok (q.v.)), so conditional expressions print using the if-then-else syntax rather than the _ => _ | _ syntax.

USES
For making pretty concrete syntax possible.
COMMENTS
Because adding new rules to the grammar may result in precedence conflicts in the operator-precedence matrix, it is as well with interactive use to test the Term parser immediately after adding a new rule, as it is only with this call that the precedence matrix is built.

As with other functions in the Parse structure, there is a companion temp_add_rule function, which has the same effect on the global grammar, but which does not cause this effect to persist when the current theory is exported.

An Isabelle-style concrete syntax for specifying rules would probably be desirable as it would conceal the complexity of the above from most users.

SEEALSO
HOL  Kananaskis-10